新研制的LBCD系列直線滾珠南京NSK軸承安裝方便，額定載荷高，使用壽命長。優化后，聚合物保持架設計減少了構件的數量，并且具有較大的滑動滾道、優化的滾珠驅動面積和更大的儲油面積。由于這些特性，LBCD產品運行非常平穩，摩擦和噪聲水平低，因此它們特別適合于敏銳應用，如醫學工程。

The newly developed LBCD series linear ball bearing of Nanjing NSK has convenient installation, high rated load and long service life. After optimization, the polymer cage design reduces the number of components, and has a larger sliding raceway, optimized ball drive area and larger oil storage area. Because of these characteristics, LBCD products run very smoothly and have low levels of friction and noise, so they are particularly suitable for sensitive applications, such as medical engineering.

塑料球南京NSK軸承具有耐腐蝕、耐化學腐蝕和重量輕的特點。它們還可以實現安靜的操作，并具有良好的阻尼性能。聚丙烯或聚甲醛是制造軸承環的標準材料，但也可以根據需要使用其余聚合物。球可以由聚合物、不銹鋼、玻璃或其余材料制成，而籠則由聚酰胺或聚丙烯制成。塑料球軸承具有自潤滑、摩擦系數小的特點。

The plastic ball Nanjing NSK bearing has the characteristics of corrosion resistance, chemical corrosion resistance and light weight. They can also achieve quiet operation and have good damping properties. Polypropylene or polyformaldehyde is the standard material for making bearing rings, but other polymers can also be used as needed. Balls can be made of polymers, stainless steel, glass or other materials, while cages are made of polyamide or polypropylene. The plastic ball bearing has the characteristics of self lubrication and small friction coefficient.

它們可以干燥而不需要其余潤滑劑。南京NSK軸承特別適用于潤滑劑不能用于清洗的場合。高比強度（強度與重量比）也是聚合物軸承的優良特性，特別是在重量是重要設計考慮的應用中。塑料球軸承通常用于須得防潮、耐化學腐蝕、不可用或只能在某些制約條件下使用的情況。

They can be dried without the need for other lubricants. Nanjing NSK bearings are especially suitable for occasions where lubricants can not be used for cleaning. High specific strength (strength to weight ratio) is also an excellent characteristic of polymer bearings, especially in applications where weight is an important design consideration. Plastic ball bearings are usually used in situations where moisture proof, chemical resistance, unavailability or limited use is required.

南京NSK軸承單元適用于許多特殊用途。在單個注塑成型工藝中，軸承可涂覆聚合物，并與高密度、耐磨的金屬粉末齒輪組合以形成齒輪單元，例如干草打包機的緊固單元。其余軸承可涂覆玻璃纖維增強聚丙烯，使支承軸適用于洗衣機。鑄造聚酰胺可用于生產耐腐蝕軸承外殼。

The Nanjing NSK bearing unit is suitable for many special purposes. In a single injection molding process, bearings can be coated with polymers and combined with high-density, wear-resistant metal powder gears to form gear units, such as the fastening unit of a hay baler. The remaining bearings can be coated with glass fiber reinforced polypropylene, so that the supporting shaft is suitable for washing machines. Cast polyamide can be used to produce corrosion resistant bearing housings.

南京NSK軸承聚四F乙烯聚酰胺套管具有壁厚小、導熱性好、在中壓下滑動速度快等優點。它們具有優異的承載能力和良好的耐磨性，是具有成本效益的產品。復合襯套、止推墊圈和墊圈由鋼背和多孔青銅三明治以及聚甲醛或聚四F乙烯加二硫化鉬(M化合物)的表面層制成。

Nanjing NSK bearing PTFE polyamide sleeve has the advantages of small wall thickness, good thermal conductivity and high sliding speed under medium pressure. They have excellent load carrying capacity and good wear resistance, and are cost-effective products. Composite bushings, thrust washers and gaskets are made of steel backed and porous bronze sandwiches and a surface layer of polyoxymethylene or polytetrafluoroethylene plus molybdenum disulfide (M compound).

文章來自：南京SKF軸承 www.wh-skf.com

The article is from: Nanjing SKF bearing www.wh-skf.com

文章來自：南京INA軸承 www.ina-china.cn

The article is from: Nanjing INA bearing www.ina-china.cn

文章來自：南京NSK軸承 www.klbbearings.com

The article is from: Nanjing NSK bearing www.klbbearings.com

QQ：524085168

電話：0510-81207777

手機：13311666672